Improvement in load support capability of a-C(Al)-based nanocomposite coatings by multilayer architecture | |
Department | 固体润滑国家重点实验室 |
Zhou SG(周升国); Wang LP(王立平); Xue QJ(薛群基) | |
2011 | |
Source Publication | Surface and Coatings Technology |
ISSN | 0257-8972 |
Volume | 206Pages:387-394 |
Abstract | Due to severe operating conditions and long lifetime requirements for mechanical components, the great challenge is to develop coatingswith anti-wear and high load support capability. The designs for nanocomposite protective coatings are very promising and provide an attractive alternative to take into account the multilayer architecture. In thiswork, a-C(Al)-basednc-TiC/a-C(Al), nc-CrC/a-C(Al) andnc-WC/a-C(Al)nanocompositeswere constructed by Cr/CrN/CrCN multilayer. The microstructure, mechanical properties, friction and wear behaviors for thesemultilayer coatingswere systemically investigated. Results showed that the top-layered nc-TiC/a-C(Al), nc-CrC/a-C(Al) and nc-WC/a-C(Al) nanocomposites were dominated by typically nanocrystallite/amorphous microstructure, and these nanocomposites constructed by multilayer approach presented superior mechanical properties which possessed relatively high hardness, low internal stress as well as high adhesion strength. Particularly, the as-fabricated nc-TiC/a-C(Al), nc-CrC/a-C(Al) and nc-WC/a-C(Al) multilayer coatings exhibited superior anti-wear capability under relatively high appliedHertzian contact pressure compared to corresponding monolayer coatings. The improvement in friction andwear performances of as-fabricatedmultilayer coatingswas mainly attributed to superior mechanical properties and formation of graphitized tribofilm as well as high load support capability by multilayer architecture, indicating that these coatings might be good candidates as solid lubrication materials in engineering applications. |
Keyword | Nanocomposite Multilayer Anti-wear Load Support Capability |
Subject Area | 材料科学与物理化学 |
Funding Organization | the 863 Program of Chinese Ministry of Science and Technology (NO.2009AA03Z105);the National 973 Program of China (Grant NO.2011CB706603) |
Indexed By | SCI |
Language | 英语 |
Funding Project | 低维材料摩擦学组 |
Citation statistics | |
Document Type | 期刊论文 |
Identifier | http://ir.licp.cn/handle/362003/818 |
Collection | 固体润滑国家重点实验室(LSL) |
Corresponding Author | Wang LP(王立平) |
Recommended Citation GB/T 7714 | Zhou SG,Wang LP,Xue QJ. Improvement in load support capability of a-C(Al)-based nanocomposite coatings by multilayer architecture[J]. Surface and Coatings Technology,2011,206:387-394. |
APA | 周升国,王立平,&薛群基.(2011).Improvement in load support capability of a-C(Al)-based nanocomposite coatings by multilayer architecture.Surface and Coatings Technology,206,387-394. |
MLA | 周升国,et al."Improvement in load support capability of a-C(Al)-based nanocomposite coatings by multilayer architecture".Surface and Coatings Technology 206(2011):387-394. |
Files in This Item: | ||||||
File Name/Size | DocType | Version | Access | License | ||
2011387-394.PDF(2196KB) | 开放获取 | License | View Application Full Text |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment