Effects of equal channel angular extrusion and subsequent heat treatment on tribological properties of TiNi alloy | |
Department | 固体润滑国家重点实验室 |
Li ZH(李志华); Cheng XH(程先华) | |
2007 | |
Source Publication | Surface Engineering |
ISSN | 0267-0844 |
Volume | 23Issue:6Pages:434-438 |
Abstract | The friction and wear properties of TiNi alloy processed by equal channel angular extrusion (ECAE) and subsequent heat treatment processing under dry sliding condition were evaluated on a block on ring M-2000 tribometer. The effects of ECAE and heat treatment on the tribological properties of TiNi alloy were investigated. The worn surface morphologies of TiNi alloy were examined by scanning electron microscopy (SEM) and the wear mechanisms were discussed. The results showed that ECAE and heat treatment contributed to improve the friction and wear behaviours of TiNi alloy remarkably. The friction coefficient and wear loss of TiNi alloy decreased after ECAE and heat treatment. The maximum wear reduction was obtained when the heat treatment temperature after ECAE was 773 K. Adhesion wear and delamination were notable for the initial TiNi alloy. The material delamination was greatly abated when the heat treatment temperature of TiNi alloy processed by ECAE was 773 K. |
Keyword | Equal Channel Angular Extrusion (Ecae) Heat Treatment Tini Alloy Dry Sliding Friction Wear |
Subject Area | 材料科学与物理化学 |
Funding Organization | National Natural Science Foundation of China (Grant No. 50071034);the open fund of State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics of China |
Indexed By | SCI |
Language | 英语 |
Citation statistics | |
Document Type | 期刊论文 |
Identifier | http://ir.licp.cn/handle/362003/4017 |
Collection | 固体润滑国家重点实验室(LSL) |
Corresponding Author | Cheng XH(程先华) |
Recommended Citation GB/T 7714 | Li ZH,Cheng XH. Effects of equal channel angular extrusion and subsequent heat treatment on tribological properties of TiNi alloy[J]. Surface Engineering,2007,23(6):434-438. |
APA | 李志华,&程先华.(2007).Effects of equal channel angular extrusion and subsequent heat treatment on tribological properties of TiNi alloy.Surface Engineering,23(6),434-438. |
MLA | 李志华,et al."Effects of equal channel angular extrusion and subsequent heat treatment on tribological properties of TiNi alloy".Surface Engineering 23.6(2007):434-438. |
Files in This Item: | ||||||
File Name/Size | DocType | Version | Access | License | ||
2007434-438.pdf(4124KB) | 开放获取 | CC BY-NC-SA | View Application Full Text |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment