Influence of Heat Treatment on Microstructure and Sliding Wear of Thermally Sprayed Fe-Based Metallic Glass Coatings | |
Department | 先进润滑与防护材料研究发展中心 |
Liu G(刘光)1,2; An YL(安宇龙)1; Chen JM(陈建敏)1; Hou GL(侯国梁)1,2; Chen J(陈杰)1,2; Chen JM(陈建敏) | |
The second department | 固体润滑国家重点实验室 |
2012 | |
Source Publication | Tribology Letters |
ISSN | 1023-8883 |
Volume | 46Issue:2Pages:131-138 |
Abstract | Fe62Ni3Cr4Mo2W3Si6B17C3 amorphous coatings were thermally sprayed by a high velocity oxygen fuel spraying system (DJ-2700) and heat-treated at the temperatures ranges from 873 to 1,173 K in vacuum for 1 h. Differential scanning calorimetry, X-ray diffraction (XRD), and scanning electron microscopy were used to study the microstructural characteristics of the coatings. Vickers hardness tester was used to measure the hardness of the coatings. At the same time, the sliding wear behavior of the coatings was evaluated in a reciprocating ball-on-disk system. Within the resolution of XRD, amorphous structure without apparent crystalline phases was obtained in the as-sprayed coating. The heat treatments above 873 K led to the crystallization of amorphous phase. With the increase of heat treatment temperature, diffusion and sintering could occur between the layers of the coatings. The highest microhardness was obtained in the coating heat-treated at 973 K. When wear tested at a relative low load of 2 N, a direct correlation between the hardness and wear resistance of the coatings seems to be reasonable. However, at relative high loads, the wear resistance of the coatings is dependent on the resistance to crack initiation and growth between the layers rather than the hardness. |
Keyword | Thermally Sprayed Coating Iron-based Metallic Glass Heat Treatment Sliding Wear |
Subject Area | 材料科学与物理化学 |
DOI | 10.1007/s11249-012-9929-4 |
Funding Organization | the Ministry of Science and Technology of China (in the name of “973” Plan, grant No. 2007CB607601) |
Indexed By | SCI |
If | 1.743 |
Language | 英语 |
Funding Project | 磨损和表面工程组 |
compositor | 第一作者单位 |
Citation statistics | |
Document Type | 期刊论文 |
Identifier | http://ir.licp.cn/handle/362003/3491 |
Collection | 固体润滑国家重点实验室(LSL) 中国科学院材料磨损与防护重点实验室/先进润滑与防护材料研究发展中心 |
Corresponding Author | Chen JM(陈建敏) |
Affiliation | 1.Chinese Acad Sci, Lanzhou Inst Chem Phys, State Key Lab Solid Lubricat, Lanzhou 730000, Peoples R China 2.Chinese Acad Sci, Grad Sch, Beijing 100049, Peoples R China |
Recommended Citation GB/T 7714 | Liu G,An YL,Chen JM,et al. Influence of Heat Treatment on Microstructure and Sliding Wear of Thermally Sprayed Fe-Based Metallic Glass Coatings[J]. Tribology Letters,2012,46(2):131-138. |
APA | Liu G,An YL,Chen JM,Hou GL,Chen J,&陈建敏.(2012).Influence of Heat Treatment on Microstructure and Sliding Wear of Thermally Sprayed Fe-Based Metallic Glass Coatings.Tribology Letters,46(2),131-138. |
MLA | Liu G,et al."Influence of Heat Treatment on Microstructure and Sliding Wear of Thermally Sprayed Fe-Based Metallic Glass Coatings".Tribology Letters 46.2(2012):131-138. |
Files in This Item: | ||||||
File Name/Size | DocType | Version | Access | License | ||
131-138.PDF(805KB) | 期刊论文 | 作者接受稿 | 开放获取 | CC BY-NC-SA | View Application Full Text |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment