Microstructure of PTFE-Based Polymer Blends and Their Tribological Behaviors Under Aqueous Environment | |
Department | 固体润滑国家重点实验室 |
Chen BB(陈贝贝)1,2; Wang JZ(王建章)1; Yan FY(阎逢元)1; Yan FY(阎逢元) | |
2012 | |
Source Publication | Tribology Letters |
ISSN | 1023-8883 |
Volume | 45Issue:3Pages:387-395 |
Abstract | Four polytetrafluoroethylene-based polymer blends (PTFE blends) with polyimide (PI), polyether ether ketone (PEEK), poly(phenyl p-hydroxybenzoate) (PHBA), and perfluoroethylene propylene copolymer (FEP) were prepared by compression molding and follow-up sintering. Their microstructure was observed by scanning electron microscope. And the tribological behaviors of PTFE blends sliding against 316 steel under pure water and sea water lubrication were comparatively evaluated using block-on-ring tribology test rig. The worn surface of counterpart was examined by X-ray photoelectron spectroscopy. The results showed that by blending with the four polymers, PTFE exhibited the transformed microstructure and improved wear resistance. Compared with FEP, rigid polymers PI, PHBA, and PEEK can enhance the wear resistance of PTFE greatly because they can effectively improve the load-carrying capacity of PTFE matrix and can more efficiently prevent the crystalline bands of PTFE from being pulled out. However, because of the weak inhibition on the pulling out of PTFE crystalline bands, FEP cannot enhance the wear resistance of PTFE as significantly as other polymers. In addition, the friction coefficients and wear rates of PTFE and its blends were lower under the lubrication of sea water than under the lubrication of pure water, which was ascribed to more excellent lubricating effect of sea water originating from the deposition of CaCO3 and Mg(OH)2 onto the sliding surfaces. |
Keyword | Ptfe Polymers Friction Wear Marine |
Subject Area | 材料科学与物理化学 |
DOI | 10.1007/s11249-011-9896-1 |
Funding Organization | the National Nature Science Foundation of China (Grant No. 50823008);the National High-Tech Research and Development Program of China (“863” Program, Grant No. 2009AA03Z105) |
Indexed By | SCI |
If | 1.743 |
Language | 英语 |
Funding Project | 功能防护材料组 |
compositor | 第一作者单位 |
Citation statistics | |
Document Type | 期刊论文 |
Identifier | http://ir.licp.cn/handle/362003/3503 |
Collection | 固体润滑国家重点实验室(LSL) |
Corresponding Author | Yan FY(阎逢元) |
Affiliation | 1.Chinese Acad Sci, Lanzhou Inst Chem Phys, State Key Lab Solid Lubricat, Lanzhou 730000, Peoples R China 2.Chinese Acad Sci, Grad Univ, Beijing 100049, Peoples R China |
Recommended Citation GB/T 7714 | Chen BB,Wang JZ,Yan FY,et al. Microstructure of PTFE-Based Polymer Blends and Their Tribological Behaviors Under Aqueous Environment[J]. Tribology Letters,2012,45(3):387-395. |
APA | Chen BB,Wang JZ,Yan FY,&阎逢元.(2012).Microstructure of PTFE-Based Polymer Blends and Their Tribological Behaviors Under Aqueous Environment.Tribology Letters,45(3),387-395. |
MLA | Chen BB,et al."Microstructure of PTFE-Based Polymer Blends and Their Tribological Behaviors Under Aqueous Environment".Tribology Letters 45.3(2012):387-395. |
Files in This Item: | ||||||
File Name/Size | DocType | Version | Access | License | ||
387-395.PDF(727KB) | 期刊论文 | 作者接受稿 | 开放获取 | CC BY-NC-SA | View Application Full Text |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment